Fire Pit Kits for sale

New site!

Better info, more stuff

Order Here

So many people that have hung out with the warmth and played in the sand of my wonderful Fire Gardens have asked me how they could make one of their own. Well I’ve taken the guess work out of all the fittings and sizes and put together a few kits that I use all the time in my work. I’ve also put together instructions on how to use these kits to make your own Fire Garden.

Questions? contact me at 510 444 7007, or email me at books@formandreform.com

 
Sand Fire GardenMore DIY How To Projects

______________________________________________________________________________________

 

Order Here

Available Kits:

 

Fire Ring Kits with 30 psi propane regulators

 

 
 

This is a great set up for 6-24″ fire rings in 10-36″ sand gardens

 

Contains:

-12″ steel fire ring, weldable 1/2 coupler, 1/2 Bulkhead coupler, 3/8″ 45 deg flare to 1/2 NPT fitting (to connect to the gas hose), 1/2  brass nipple, Teflon tape, lighter, and a 30 psi regulator with needle valve and 12′ hose.
 

-Includes a 1/2 Bulkhead coupler that requires no welding or use the black coupler to weld into your container.

 

Order Here

________________________________________________________________________________

Upgrade either kit to a bigger ring and/or to stainless steel to prevent holes in burner from rusting shut during the rainy season.

 

 

30″ Dual burner Stainless

_______________________________________________________________________________

Fire Ring Kits with High Flow propane regulators

 

 
 

This is a great set up for 6-24″ fire rings in 10-36″ sand gardens where higher flow and finer tuning of the flame is important. Larger fire rings of 24″ and above should use this regulator.

 

 
-12″ steel fire ring, weldable 1/2 coupler, 1/2 Bulkhead coupler, 3/8″ 45 deg flare to 1/2 NPT fitting (to connect to the gas hose), 1/2  brass nipple, Teflon tape, lighter, and a 0-60 psi regulator  with a 12′ hose.
 

-Includes a 1/2 Bulkhead coupler that requires no welding or use the black coupler to weld into your container.

www.flickr.com
jon sarriugarte's items Go to jon sarriugarte's photostream